BELTONG · WPC DECKING
WPC Decking for Terraces, Gardens and Poolside Areas
Wood-plastic composite decking in four ranges — classic, 3D embossed, co-extrusion and DIY tiles — with matching joists, clips and trims. Supplied in export packing for distributors, landscapers and project buyers.
THE RANGE
Four Decking Ranges, One System
All four ranges share the same fixing principle: joists, concealed clips and matching end trims. Choose the surface and the core that fit the project and the budget.

Classic Decking
Hollow boards with square or round cores, in grooved, light wood grain or sanded finishes. Seven profiles from 140×20 to 150×25 mm.

3D Embossed Decking
Deep wood-grain relief pressed into the board so the texture stays visible underfoot. Three profiles: 140×25, 160×25 and 150×23 mm.

DIY Decking Tiles
300×300 mm and 300×600 mm click-together tiles for balconies, roof terraces and rental units — no joists, no fixings into the substrate.
Co-extrusion boards are quoted separately. They use a capped outer layer in ten colours, including bicolour combinations, and are specified where colour stability and surface hardness matter most.
PROFILES
Models and Dimensions
Model codes follow the core: WTSH square hollow, WTRH round hollow, WTSL / WTCSL solid, WTSH3 3D embossed, WTCRH / WTCSA co-extrusion.
| Range | Model | Width × thickness | Core |
|---|---|---|---|
| Classic | WTSH-14025A / B | 140 × 25 mm | Square hollow |
| Classic | WTRH-14025A / B | 140 × 25 mm | Round hollow |
| Classic | WTSH-15025C | 150 × 25 mm | Square hollow |
| Classic | WTRH-14025C | 140 × 25 mm | Round hollow |
| Classic | WTSL-14020C | 140 × 20 mm | Solid |
| 3D embossed | WTSH3-14025 | 140 × 25 mm | Square hollow |
| 3D embossed | WTSH3-16025 | 160 × 25 mm | Square hollow |
| 3D embossed | WTRH3-15023 | 150 × 23 mm | Round hollow |
| Co-extrusion | WTCRH-13823 | 138 × 23 mm | Round hollow |
| Co-extrusion | WTCRH-13822 / WTCRH-14022 | 138 × 22 / 140 × 22 mm | Round hollow |
| Co-extrusion | WTCSL-13822 | 138 × 22 mm | Solid |
| Edge trim | WTCSA-7011 | 70 × 11 mm | Solid |
| DIY tiles | 300 × 300 / 300 × 600 mm | Snap-together | Hollow, with base grid |
Board length is confirmed per model and per order. Tell us the length you normally buy and we will quote that size.
FINISHES
Colours and Surface Treatments
Colour references are matched per order, so boards, end caps and trims arrive in the same batch colour.
Classic range
BlackTeakPad TeakChocolateRedGreyCreamCoffee
Surfaces: grooves, light wood grain, sanding.
Co-extrusion range
IPEWalnutRose WoodMapleLight WalnutTeakAntiqueSlate GreyGreyBlack
Finishes: embossed, wood grain, sanding. Bicolour combinations are available on request.
SYSTEM
Accessories and Fixing
A decking order is quoted complete: boards, substructure and the small parts that fail first if they are left out.
Concealed clips
PJKK-01 and PJKK-02 stainless clips fix boards to the joist without visible screws on the walking surface.
Edge and joint trims
PJLG-03, PJLG-04 and PJJX-03 profiles close the board edges and internal corners; 3 m standard length.
End and fascia boards
PJFB-04 boards finish the deck perimeter where the substructure would otherwise be visible.
PACKING
Packed for Container Loading
Decking is packed in cartons and bundled pallets, with corner protection and batch labels, then loaded against a plan prepared for the container size you book.
- Cartons and pallets sized to the board profile
- Batch colour reference on every pack
- Loading plan issued before shipment
- Boards can be mixed with cladding and fencing in one container

ALSO IN THE OUTDOOR RANGE
Cladding, Fencing and Posts
The same material and colour system covers the rest of the exterior, so a project can be quoted in one order.
WPC cladding
WTPC-21926 (219×26 mm) and WTPC-15621 (156×21 mm) in classic and co-extrusion versions for exterior walls.
WPC fencing
WTFC-16120, WTFC-20520 and WTFC-20521 fence boards with top frame, post caps and bottom rails.
WPC posts
WTFCT-100F2 and WTFCT-100F4 posts at 100×100 mm for fencing, pergolas and railing support.
QUESTIONS FROM BUYERS
Common Questions
Which range should I choose?
Classic is the value option for standard terraces and stock orders. 3D embossed is chosen where the look of real grain matters. Co-extrusion is specified for colour stability and harder wearing surfaces. DIY tiles suit balconies and small terraces where no joists can be fixed.
Can I mix decking with cladding and fencing in one container?
Yes. Loading is calculated on board length, carton dimensions, total volume and weight limit. Send the full list and a loading plan is prepared for approval.
Are joists and clips included?
They are quoted as separate line items so you can see the complete installed cost. Tell us the substructure arrangement and the clips and trims are matched to it.
How do I get the colour right?
Send the reference you want to match, or ask for the nearest colour from the range. Samples can be arranged so you can check the finish before ordering.
What is the minimum order?
It depends on the range, colour and packing. Send the models and the quantity you plan to buy and the minimum is confirmed for that combination.
Planning a Decking Order?
Send the model, colour, quantity and destination port. You will get board, accessory and loading costs in one quotation.
SEND AN INQUIRY ↗